AllJammer.com : RSS Products Feed :: All Signal Booster http://www.alljammer.com/ en Copyright (c) 2026 AllJammer.com alljammer@hotmail.com (AllJammer.com) alljammer@hotmail.com (AllJammer.com) Mon, 22 Apr 2019 07:37:10 +0000 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 Cell Phone Signal Booster for GSM/PCS Dual Band (850MHz/1900MHz) https://www.alljammer.com/index.php?main_page=product_info&products_id=123 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=123 Wholesale Cell Phone Signal Booster for GSM/PCS Dual Band (850MHz/1900MHz)

Product Description

Firstly, come into the world of this Cell Phone Signal Booster for GSM/PCS Dual Band (850MHz/1900MHz),You can try its powerful influence in the following small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc. Also this booster is popular with small-scale hot-spot signal Complaints areas, such as conference rooms ,a small supermarket, small shopping malls ,the office and small public areas ,etc. Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs and leisure etc. Some other occasions you can also see it. Elevator, lift wells in particular, home, office, luxury yachts, private cars, public security system and road safety management, etc.

Of course other functions and occasions you will be lucky with this device, if you are still out of the booster world. If you are still suffering the no signals life, start from here, it is your time to change your life to a better one.

Cell Phone Signal Booster for GSM/PCS Dual Band Specification:

  • Frequency range

-Uplink GSM82-849MHz, PCS1850-1910MHz

-Downlink GSM869-894MHz, PCS1930-1990MHz

  • Gain

-Up link: Gp≥55dB,Downlink: Gp≥60dB

-Up link: Gp≥50dB,Downlink: Gp≥55dB

  • Output up:

-GSM Up link 15dBm, PCS Up link 13dBm

-GSM Downlink: 20dBm, PCS Downlink: 18dBm

  • Function:

-Power supply LED denote

-Export power LED denote

  • Port VSWR:≤1.8DB
  • I/O impedence: 50Ω/N connector
  • ALC:≥20dB
  • In-Band ripple:≤6dB
  • Noise figure:≤6dB
  • Transmission delay:≤0.5μs
  • Gross Weight: 760G
  • Power supply: AC: 110-240V DC: 5V
  • Size: 170*105*30mm
  • Coverage area: 60Sqm

Accessories:

  • Cell Phone Signal Booster
  • Indoor Antenna
  • Outdoor Antenna
  • Power Adapter
  • Coaxial Cable 5M
  • Coaxial Cable 10M
  • Indoor Antenna Accessories and Screws
  • User Manual

Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=123 Thu, 14 Jun 2018 07:09:57 +0000 311.00 USD 123 2 1000 JM165012 http://www.alljammer.com/Array Cell Phone Signal Booster for GSM/DCS Dual Band (900MHz/1800MHz) https://www.alljammer.com/index.php?main_page=product_info&products_id=122 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=122 Wholesale Cell Phone Signal Booster for GSM/DCS Dual Band (900MHz/1800MHz)

Product Description

This Cell Phone Signal Booster for GSM/DCS Dual Band (900MHz/1800MHz) can be applied into different places for improving the quality of your phone calling. It can be used in following small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc.

Also this booster is popular with small-scale hot-spot signal Complaints areas, such as conference rooms ,a small supermarket, small shopping malls ,the office and small public areas ,etc. Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs and leisure etc. Some other occasions you can also see it. Elevator, lift wells in particular, home, office, luxury yachts, private cars, public security system and road safety management, etc.

From above you can know its power, so what are you hesitating about? Go directly and buy one for you necessary usage.

This Cell Phone Signal Booster for GSM/DCS Dual Band Specification:

  • Frequency range:

-Uplink GSM890-915MHz, DCS1710-1785MHz

-Downlink GSM935-960MHz, DCS 1805-1880MHz

  • Gain

-Up link: Gp≥65dB,Downlink: Gp≥70dB

-Up link: Gp≥60dB,Downlink: Gp≥67dB

  • Output up:

-GSM Up link: 15dBm,DCS Up link: 13dBm

-GSM Downlink: 20dBm, DCS Downlink: 18dBm

  • Function:

-Power supply LED denote

-Export power LED denote

  • Port VSWR:≤1.8DB
  • I/O impedence: 50Ω/N connector
  • ALC:≥20dB
  • In-Band ripple:≤6dB
  • Noise figure:≤6dB
  • Transmission delay:≤0.5μs
  • Gross Weight: 760G
  • Power supply: AC: 110-240V DC: 5V
  • Size: 170*105*30mm
  • Coverage area: 60Sqm

Accessories:

  • Cell Phone Signal Booster
  • Indoor Antenna
  • Outdoor Antenna
  • Power Adapter
  • Coaxial Cable 5M
  • Coaxial Cable 10M
  • Indoor Antenna Accessories and Screws
  • User Manual

Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=122 Thu, 14 Jun 2018 07:09:56 +0000 311.00 USD 122 2 1000 JM165009 http://www.alljammer.com/Array ABS-DCS/UMTS Dual band Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=276 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=276 Wholesale ABS-DCS/UMTS Dual band Mobile Phone Signal Repeater/Amplifier/Booster

Detailed Product Description

A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

Introduction to Mobile Phone Signal Repeater

l Enhance Mobile Phone Signal Strength

l Improve Communication Quality

l Reduce Cellphone Radiation

l Protract Cellular Battery Life

l Economic Building Cost

l Easy Operation

l Easy Installation

l Build-in Power Supply

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l High gain, easy installation and operation.

l Full-duplex, single-port design, build-in power supply.

l Use ALC technology, adjust extent automatically

l LED Light Working & Signal Condition Indicators

l Big linear power, control intermodulation & saturation stably

l Dependability stand by GB6993-86 standard

l Compatibility of electromagnetism according with ETS300 609-4

l CE and RoHs Approved

Technique

Frequency range

Uplink 1710-1785MHz 1930-1990MHz
Downlink1805-1880MHz 2110-1180MHz

Gain ( dB)

Uplink Gp≥60 Downlink Gp≥65

Export power (Po)

≥27dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-10?/span>?/span>60?/span>

Power supply

AC110?/span>240V 45?/span>55Hz

Size

220 x 140 x 40 mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

2000 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=276 Thu, 14 Jun 2018 07:09:52 +0000 350.00 USD 276 3 1000 ABS-DCS/UMTS-Dual http://www.alljammer.com/Array Cell Phone Signal Booster (Dual Band GSM 900MHz/1800MHz)-EU https://www.alljammer.com/index.php?main_page=product_info&products_id=118 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=118 Wholesale Cell Phone Signal Booster (Dual Band GSM 900MHz/1800MHz)-EU

    Product Description

    Features

    Low or no mobile signal inside your room, forcing you to make calls while leaning out a window? Stuck in a 2 year contract but can't use your phone at home or work? Miss loads of calls because you have to leave your phone in one place to get signal? Well no longer with the worldwide use Cell Phone Signal Booster (Dual Band GSM 900MHz/1800MHz).

    How does it work? Long story short, this Cell Phone Signal Booster introduces a revolutionary, patent-pending technology that captures low-signals from outside, brings it inside, enhances/boosts it, then extends that signal back out to create a large, high-signal cell phone zone. To prove it works perfectly, our product tester locked himself inside a metal shipping container coated on the inside with alluminium foil. His cell phone was left with 0 bars, but what happened when we turned on the Cell Phone Signal Booster? You got it - full bars and a perfect signal.

    Who is it useful for? This Cell Phone Signal Booster is usually used in an area of the country where cell phone signals are normally weak, or locations where signals may be hard to reach, like basements, car parks, and tunnels. Due to its coverage area of up to 800 square meters, this Cell Phone Signal Booster has also found tremendous popularity in large areas owned by private businesses, such as supermarkets, cinemas, hotels, airports, etc.

    When you are in a normally low-signal zone, buying a new cell phone won't do anything. What you need is this Cell Phone Signal Booster (Dual Band 900MHz/1800MHz) for maximum bars and excellent reception. It even includes everything you need to get it up and running and is suitable for mobile networks worldwide (dual band 900/1800MHZ). Order now and we'll ship it out to you tomorrow. Brought to you by alljammer., the leader in consumer electronics.

    At a Glance...

    • Instantly boost your cell phone signals!
    • Dual band GSM (900MHz/1800MHz) for worldwide use
    • Up to 800 square meter working range
    • Comes ready to go - no need for anything extra!
    • Powerful solution at an affordable price

    Technical Specifications

    • Frequency range:
      -Up link GSM 890-915/DCS1710-1785(MHz)
      -Downlink GSM 935-960/DCS1805-1880(MHz)
    • Coverage: 500-800m2 (Distance will reduced when obstacles are in the way i.e. surrounding walls)
    • Gain(dB):
      -GSM/DCS Up link 65/55
      -GSM/DCS Downlink 70/60
      -Gain adjustable range MGC≥30dB
    • Guard band rejection
      -GSM (BW-60dB)<=42 MHz (BW-70dB)<=45 MHz
      -DCS (BW-60dB)<=104MHz (BW-70dB)<=107MHz
    • Power supply: AC110~220V 45~55Hz
    • Dimensions: Signal Booster: 160 x 121 x 22 mm (L x W x D)

    Product Notes

    • Long range cell phone signal booster! Up to 800 square meters!
    • This device is for GSM 900 and 1800 MHz signals only. Please check frequency your country uses before purchasing


    Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.htm



    Buy Now ]]>     alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=118 Thu, 14 Jun 2018 07:09:42 +0000 280.00 USD 118 4 1000 JM110833 http://www.alljammer.com/Array     ABS-GSM/UMTS Dual band Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=282 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=282 Wholesale ABS-GSM/UMTS Dual band Mobile Phone Signal Repeater/Amplifier/Booster

    Detailed Product Description

    A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

    Introduction to Mobile Phone Signal Repeater

    l Enhance Mobile Phone Signal Strength

    l Improve Communication Quality

    l Reduce Cellphone Radiation

    l Protract Cellular Battery Life

    l Economic Building Cost

    l Easy Operation

    l Easy Installation

    l Build-in Power Supply

    The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

    Features

    l High gain, easy installation and operation.

    l Full-duplex, single-port design, build-in power supply.

    l Use ALC technology, adjust extent automatically

    l LED Light Working & Signal Condition Indicators

    l Big linear power, control intermodulation & saturation stably

    l Dependability stand by GB6993-86 standard

    l Compatibility of electromagnetism according with ETS300 609-4

    l CE and RoHs Approved

    Technique

    Frequency range

    Uplink 890-915MHz 1930-1990MHz
    Downlink 935~960MHz 2110-1180MHz

    Gain ( dB)

    Uplink Gp≥60 Downlink Gp≥65

    Export power (Po)

    ≥27dBm

    Pass band ripple

    ≤3dB

    I/O impedance

    50Ω/N connector

    Noise figure

    ≤4dB

    Transmission Delay

    ≤0.5μs

    Ambient temperature

    -10?/span>?/span>60?/span>

    Power supply

    AC110?/span>240V 45?/span>55Hz

    Size

    220 x 140 x 40 mm

    Reliability

    To the GB6993-86 standard

    Electromagnetic compatibility

    To the ETS300 694-4 standard

    Function

    a) Power supply LED denote
    b) Export power LED denote

    coverage area

    2000 m2

    Installation Approaches

    1. Fix up outdoor antenna reception on housetop and point to signal tower.
    2. Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=282 Thu, 14 Jun 2018 07:09:41 +0000 350.00 USD 282 3 1000 ABS-GSM/UMTS-Dual http://www.alljammer.com/Array ABS-GSM/DCS Dual band Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=279 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=279 Wholesale ABS-GSM/DCS Dual band Mobile Phone Signal Repeater/Amplifier/Booster

      Detailed Product Description

      A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

      Introduction to Mobile Phone Signal Repeater

      l Enhance Mobile Phone Signal Strength

      l Improve Communication Quality

      l Reduce Cellphone Radiation

      l Protract Cellular Battery Life

      l Economic Building Cost

      l Easy Operation

      l Easy Installation

      l Build-in Power Supply

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      Uplink 890-915MHz 1930-1990MHz
      Downlink935~960MHz 2110-1180MHz

      Gain ( dB)

      Uplink Gp≥60 Downlink Gp≥65

      Export power (Po)

      ≥27dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?/span>?/span>60?/span>

      Power supply

      AC110?/span>240V 45?/span>55Hz

      Size

      220 x 140 x 40 mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      2000 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc

      SpecificationsInstallation Sketch Map



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=279 Thu, 14 Jun 2018 07:09:39 +0000 350.00 USD 279 3 1000 ABS-GSM/DCS-Dual http://www.alljammer.com/Array       ABS-CDMA/PCS Dual band Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=273 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=273 Wholesale ABS-CDMA/PCS Dual band Mobile Phone Signal Repeater/Amplifier/Booster

      Detailed Product Description

      A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

      Introduction to Mobile Phone Signal Repeater

      1. Enhance Mobile Phone Signal Strength
      2. Improve Communication Quality
      3. Reduce Cellphone Radiation
      4. Protract Cellular Battery Life
      5. Economic Building Cost
      6. Easy Operation
      7. Easy Installation
      8. Build-in Power Supply

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      Uplink 1850-1910MHz 824-849MHz
      Downlink1930-1990MHz 869-894MHz

      Gain ( dB)

      Uplink Gp≥60 Downlink Gp≥65

      Export power (Po)

      ≥27dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?0?/span>

      Power supply

      AC110?40V 45?5Hz

      Size

      220 x180 x 20 mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      2000 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If can not call out, please adjust the direction of outdoor antenna.
        3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20

      Accessories
      SelectionOutdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc

      SpecificationsInstallation Sketch Map



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=273 Thu, 14 Jun 2018 07:09:26 +0000 100.00 USD 273 1.5 1000 ABS-CDMA/PCS-Dual http://www.alljammer.com/Array       ABS-30-1G1D GSM/DCS dual signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=352 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=352 Wholesale ABS-30-1G1D GSM/DCS dual signal Repeater/Amplifier/Booster

      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=352 Thu, 14 Jun 2018 07:09:17 +0000 1500.00 USD 352 2 1000 ABS-30-1G1D http://www.alljammer.com/Array       ABS-23-1G1D GSM/DCS dual signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=351 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=351 Wholesale ABS-23-1G1D GSM/DCS dual signal Repeater/Amplifier/Booster

      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=351 Thu, 14 Jun 2018 07:08:57 +0000 680.00 USD 351 2 1000 ABS-23-1G1D http://www.alljammer.com/Array       ABS-15-1G1D GSM/DCS dual signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=349 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=349 Wholesale ABS-15-1G1D GSM/DCS dual signal Repeater/Amplifier/Booster

      Product Description

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      890-915/1710-785
      935-960/1805-880

      Gain ( dB)

      Uplink Gp≥55 Downlink Gp≥60

      Export power (Po)

      ≥15dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?pan>60?pan>

      Power supply

      AC110240V 4555Hz

      Size

      204×120×37mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      800 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=349 Thu, 14 Jun 2018 07:08:48 +0000 300.00 USD 349 2 1000 ABS-15-1G1D http://www.alljammer.com/Array       ABS-15-1C1P CDMA/PCS dual signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=353 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=353 Wholesale ABS-15-1C1P CDMA/PCS dual signal Repeater/Amplifier/Booster

      Product Description

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      824-849/1850-910
      869-894/1930-990

      Gain ( dB)

      Uplink Gp≥55 Downlink Gp≥60

      Export power (Po)

      ≥15dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10??span>60??span>

      Power supply

      AC110240V 4555Hz

      Size

      204×120×37mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      800 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc

      SpecificationsInstallation Sketch Map



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=353 Thu, 14 Jun 2018 07:08:47 +0000 300.00 USD 353 2 1000 ABS-15-1C1P http://www.alljammer.com/Array       ABS-17-1P PCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=323 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=323 Wholesale ABS-17-1P PCS signal Repeater/Amplifier/Booster

      Product Description

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range PCS1900

      1850—1910MHz1930—1990MHz

      Gain ( dB)

      Uplink Gp≥55 Downlink Gp≥60

      Export power (Po)

      ≥17dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?pan>60?pan>

      Power supply

      AC110240V 4555Hz

      Size

      204×120×37mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      800 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=323 Thu, 13 Oct 2016 18:44:33 +0000 212.50 USD 323 3 1000 ABS-17-1P http://www.alljammer.com/Array       MiNi GSM 900 10dBm+ Cell Phone Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=130 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=130 Wholesale MiNi GSM 900 10dBm+ Cell Phone Signal Booster

      Product Description

      What you are looking at is the MiNi GSM 900 10dBm+ Cell Phone Signal Booster, which is the best solution for the place lacks of cell phone signals! Compact designed, the MiNi GSM 900 10dBm+ Cell Phone Signal Booster provides you with great performance! This Cell Phone Signal Booster product can improve both outdoor and indoor electromagnetism environments. Adopts high quality material, the Cell Phone Signal Booster is great in durability and reliability! Besides, this MiNi GSM 900 10dBm+ Cell phone signal Booster can help to reduce radiation of cell phones and protract cellular battery life, and improve GSM voice communication quality and reduce the rate of drop calls. Small item with great use, do not miss it!
      Best choice is here waiting for you!


      Features:

      • Works for 890~960Mhz signal range
      • Designed to amplify GSM 900 cell phone signals
      • Requires outdoors antenna to operate (F-cable connector)
      • Extends cell phone coverage to areas that have poor or no cell phone signal
      • The 10dBm Cell Phone Signal Repeater is designed to amplify GSM 900 cell phone signals
      • The 10dBm Cell Phone Signal Repeater works for 890~960Mhz signal range
      • High quality material makes the Cell Phone Signal Repeater durable and reliable for long time use



      Specifications:

      • Frequency range:Uplink 890-915MHZ Downlink 935-960MHz
      • Gain ( dB):Uplink Gp≥45 Downlink Gp≥50
      • Export power (Po):≥10dBm
      • Pass band rippleL:≤3dB
      • I/O impedance:50Ω/N connector
      • Noise figure:≤4dB
      • Transmission Delay:≤0.5μs
      • Ambient temperature:-10?? ~ +60??
      • Power supply:AC110~220V 45~55Hz
      • Size:160 x 60 x 20 mm(L x W x H)
      • Reliability:To the GB6993-86 standard
      • Function

      a) Power supply LED denote

      b) Export power LED denote

      • Coverage area:50 m2




      Product Notes:

      • If still no signal receipt after activated booster, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      • Please adjust the direction of outdoor antenna if it cannot call out
      • If strength is not steady, please check if outdoor and indoor antenna are too close. Please ensure the outdoor and indoor antenna have distance of 20 meters at least ,with a wall between and net a same horizontal line
      • The distance between the outdoor antenna and the amplifier is not more than 30 meters
      • The outdoor Antenna not close to a large antenna, high-voltage lines, transformers, or metal mesh, etc.
      • The distance between the indoor antenna and the amplifier is not more than 40 meters
      • The indoor antennas do not close to the wall as far as possible in order to increase the coverage area
      • The indoor antenna and the outdoor antenna are advised to stay away from each other for more than one floor distance to prevent cyclic signal amplification
      • If lack of communication quality, please change the installation position of the outdoor antenna and adjustment the indicate direction of antenna
      • It is best to enclose waterproof tape at the junction, and prevent moisture narrow the indoor signal coverage area
      • Try to straight the cable, do not bend more than 90 degree



      Accessories:

      • Cell Phone Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 2M
      • Coaxial Cable 10M
      • Indoor Antenna Accessories and Screws
      • User Manual

      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=130 Sat, 24 Sep 2016 02:38:32 +0000 100.00 USD 130 1.5 999 JM171525 4 http://www.alljammer.com/Array       ABS-CDMA980 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=275 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=275 Wholesale ABS-CDMA980 Mobile Phone Signal Repeater/Amplifier/Booster

      Detailed Product Description

      A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

      Introduction to Mobile Phone Signal Repeater

      l Enhance Mobile Phone Signal Strength

      l Improve Communication Quality

      l Reduce Cellphone Radiation

      l Protract Cellular Battery Life

      l Economic Building Cost

      l Easy Operation

      l Easy Installation

      l Build-in Power Supply

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      Uplink:824—849MHZ
      Downlink 869-894MHz

      Gain ( dB)

      Uplink Gp≥60 Downlink Gp≥65

      Export power (Po)

      ≥27dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?/span>?/span>60?/span>

      Power supply

      AC110?/span>240V 45?/span>55Hz

      Size

      220 x 140 x 40 mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      2000 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.

      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.

      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.

      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.

      2. If can not call out, please adjust the direction of outdoor antenna. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc

      Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=275 Thu, 29 Oct 2015 19:50:43 +0000 350.00 USD 275 3 1000 ABS-CDMA980 http://www.alljammer.com/Array <![CDATA[ Dual Band Mobile Phone Signal Booster (GSM900&DCS1800) ]]> https://www.alljammer.com/index.php?main_page=product_info&products_id=448 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=448 Wholesale Dual Band Mobile Phone Signal Booster (GSM900&DCS1800)

      Product Description

      Are you seeking a cell phone booster in the market for your home, office, or car? Are you looking for information on the different types of cell boosters, which brands are the best, and how to install and operate your cell signal booster? There is a dual band mobile phone signal booster available for use with dual band phones.

      A mobile phone repeater will allow you mobile phone to be a true wireless device. Once you get a booster, you will be able to throughout you whole house without having worry about dropped calls and little sound volume. That is capable of improving the signal strength of the GSM900 and DCS1800 phone through signal amplification up to an area of 1000 square meters. That means the cell phone booster help you to achieve long distance and more reliable communication.

      Having a dual band cellular phone booster you’ll get a perfect connection and communication. If you’re in a weak signal area, the mobile phone signal booster can enhance the signal strength. It is worth to possess, you deserve it.

      Notes: Long range Mobile Phone Signal Repeater! Up to 1000 square meters!
      This device is for GSM900 and DCS1800 signals only. Please check frequency your country uses before purchasing


      Specifications

      • Frequency range:

      -Up link GSM 890-915/DCS1710-1785(MHz)

      -Downlink GSM 925-960/DCS1805-1880(MHz)

      • Coverage: Up to 1000m2 (Distance will be reduced when obstacles are in the way i.e. surrounding walls)
      • Gain (dB):

      -GSM/DCS Up link 65/53
      -GSM/DCS Downlink 70/58

      • Gain adjustable range MGC≥30dB
      • Pass band ripple:

      -GSM: 4 dB
      -DCS:15 dB

      • I/0 impedance: 50V/N Connector
      • I/0 return loss: ≤- 10 dB
      • Noise igure: ≤- 8 dB
      • Intermodulation attenuation(Po=13dBm): ≥40dBc
      • Transmission Delay: ≤0.5us
      • Guard band rejection:

      -GSM (BW-60dB) ≤42 MHz(BW-70dB) ≤ 45 MHz
      -DCS (BW-58dB) ≤104MHz (BW-60dB) ≤107MHz

      • Power supply: AC110220V±10% 4555Hz
      • Dimensions: Signal Booster: 158 x 136 x 37 mm (L x W x D)
      • Reliabiity: To zhe GB6993-86 standard
      • Electromasnetic compatibility: To zhe ETS300 694-4 standard
      • Color:Grey

      Accessories :

      • Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 2M
      • Coaxial Cable 10M
      • Indoor Antenna Accessories and Screws

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=448 Thu, 29 Oct 2015 19:50:43 +0000 3755.00 USD 448 3 1000 JM110867 http://www.alljammer.com/Array       <![CDATA[ CDMA800 & 3G Dual Band Signal Booster ]]> https://www.alljammer.com/index.php?main_page=product_info&products_id=456 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=456 Wholesale CDMA800 & 3G Dual Band Signal Booster

      Product Description

      Are you often or sometimes feels annoyed that your conversation has to be cut down because of the weak signal? Then this CDMA800 & 3G Dual Band Signal Booster can give you a hand. Some of you know that signal repeater is a kind of effective equipment which is designed to pick up the outdoor reception from service provider's cell phone tower and amplify it.

      This signal booster owns a fully integrated Dual Band 800MHZ-3G antenna system, which can make the signal stronger. Besides it including intelligent signal processing and real time adaptive operation. And it can adjust power levels automatically so as to ensure a consistent coverage footprint. What’s more, it has the reprogrammable (in the field) enabling spectrum or carrier reconfigurations as needed function. And because of the patented algorithms and adaptive processing this one will not interfere with other wireless frequencies or radio devices. Last but not the least is that it has been approved by CE.

      If you are puzzled by low signal problem, this one must be a good choice. So come here and contact us. We will offer you high quality products at the best price.

      Specification

      • Frequency range:

      -Up link:CDMA 824-849/ 3G 1920-1980(MHz)
      -Downlink:CDMA 869-894/3G 2110-2170(MHz)

      • Gain(dB)

      -CDMA/3G:65/53
      -CDMA/3G:70/58

      • Gain adjustable range:MGC≥30dB
      • Output power(dBm):≥17
      • Pass band ripple:CDMA/3G,15dB
      • Guard band rejection:CDMA/3G (BW-58dB)≤104MHz (BW-70dB)≤107 MHz
      • I/O impedance:50?/N Connector
      • I/O return loss:≤-10dB
      • Noise figure:≤-8dB
      • Inter-modulation attenuation(Po=13dBm):≥40dBc
      • Transmission Delay:≤0.5us
      • Ambient temperature:-10õà0?i>
      • Power supply:AC110220V±10% 4555Hz
      • SIze:158mm*136mm*37mm
      • Product weight:1.6kg
      • Reliability:To the GB6993-86 standard
      • Electromagnetic compatibility:To the ETS300 694-4 standard
      • Color:Pearl White

      Accessories

      • Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 2M
      • Coaxial Cable 10M
      • Indoor Antenna Accessories and Screws

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=456 Thu, 29 Oct 2015 19:50:43 +0000 375.00 USD 456 2 1000 JM110876 http://www.alljammer.com/Array       ABS-33-1P PCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=344 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=344 Wholesale ABS-33-1P PCS signal Repeater/Amplifier/Booster

      Product Description

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range PCS1900

      1850—1910MHz1930—1990MHz

      Gain ( dB)

      Uplink Gp≥55 Downlink Gp≥60

      Export power (Po)

      ≥33dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?pan>60?pan>

      Power supply

      AC110240V 4555Hz

      Size

      204×120×37mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      3000 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=344 Thu, 23 Jul 2015 19:25:16 +0000 900.00 USD 344 2 1000 ABS-33-1P http://www.alljammer.com/Array       ABS-33-1D DCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=347 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=347 Wholesale ABS-33-1D DCS signal Repeater/Amplifier/Booster

      Product Description

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range DCS1800

      1710—1785MHz
      1805—1880MHz

      Gain ( dB)

      Uplink Gp≥55 Downlink Gp≥60

      Export power (Po)

      ≥33dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?pan>60?pan>

      Power supply

      AC110240V 4555Hz

      Size

      204×120×37mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      3000 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=347 Thu, 23 Jul 2015 19:25:16 +0000 500.00 USD 347 2 1000 ABS-33-1D http://www.alljammer.com/Array       ABS-27-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=354 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=354 Wholesale ABS-27-1C CDMA signal Repeater/Amplifier/Booster

      Product Description

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range CDMA800(GSM850)

      824849MHz
      869      894MHz

      Gain ( dB)

      Uplink Gp≥55 Downlink Gp≥60

      Export power (Po)

      ≥27dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?pan>60?pan>

      Power supply

      AC110240V 4555Hz

      Size

      204×120×37mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      3000 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=354 Thu, 23 Jul 2015 19:25:16 +0000 550.00 USD 354 2 1000 ABS-27-1C http://www.alljammer.com/Array       PCS1900 Mobile Phone Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=447 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=447 Wholesale PCS1900 Mobile Phone Signal Booster

      Product Description

      You might often experience the inability to talk on your cell phone due to you weak signal. Or you mobile phone always shows “no signal” or just little signal. If you’re waiting for an important call or a person try to call you, because of the weak or blind signal, you miss the calls. What a pity thing! The unavailable or weak signal is really terrible for you.

      The GSM 1900MHz mobile phone signal booster has long range distance which up to 1000 meters. In most case a cell signal booster will allow your mobile phone to be a true wireless device. Once you get a booster you will achieve long distance and more reliable communications, and you wouldn’t be forced to stand near a window or even outside.

      Whether you use your cell phone for business or just social communication at home, a booster is very necessary. With a booster you will never lose signal in places or environments. More details please see below specific specifications.

      Notes: Long range Mobile Phone Signal Repeater! Up to 1000 square meters!
      This device is for PCS1900 signals only. Please check frequency your country uses before purchasing


      Specifications

      • Frequency range:


      -Up link PCS 1850-1910MHz

      -Downlink PCS 1930-1990MHz

      • Coverage:Up to 1000m2 (Distance will be reduced when obstacles are in the way i.e. surrounding walls)
      • Gain (dB):

      -PCS Up link 53
      -PCS Downlink 58

      • Gain adjustable range MGC≥30dB
      • Pass band ripple: PCS:15 dB
      • I/0 impedance: 50V/N Connector
      • I/0 return loss: ≤- 10 dB
      • Noise igure: ≤- 8 dB
      • Intermodulation attenuation(Po=13dBm): ≥40dBc
      • Transmission Delay: ≤0.5us
      • Guard band rejection :
      • -PCS (BW-58dB) ≤104MHz (BW-60dB) ≤107MHz
      • Power supply: AC110220V±10% 4555Hz
      • Dimensions: Signal Booster: 158 x 136 x 37 mm (L x W x D)
      • Reliabiity: To zhe GB6993-86 standard
      • Electromasnetic compatibility: To zhe ETS300 694-4 standard
      • Color:White



      Accessories :

      • Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 2M
      • Coaxial Cable 10M
      • Indoor Antenna Accessories and Screws

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=447 Thu, 23 Jul 2015 19:25:16 +0000 290.36 USD 447 3 1000 JM110866 http://www.alljammer.com/Array       DCS1800 Mobile Phone Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=449 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=449 Wholesale DCS1800 Mobile Phone Signal Booster

      Product Description

      Have you ever suffered such thing? Many times, you have to face the bad signal strength problem un-willingly. But now due to the advanced technology, you couldn’t face to the lower signal strength. A mobile phone signal booster has got rid of all problems.

      A cell phone booster is a device, which use to amplify the lower signal strength to full and high signal strength in a weak area. With nowadays advanced technology, the amplify range can be reach 1000 square meters. And this device is used for amplify the signal for DCS1800 signals. More detailed information, please refer to the product specifications and features.

      You can now install a cell phone signal booster at any place you want to use. The signal boosters lead to reduced dropped calls and even help you to extend your cell phone range. If your cell phone provide for a weak network, this signal booster could be resolve your annoyances and get stronger signals. It is an optimal choice for you.

      Notes: Long range Mobile Phone Signal Repeater! Up to 1000 square meters!
      This device is for DCS1800 signals only. Please check frequency your country uses before purchasing.


      Specifications

      • Frequency range:

      -Up link DCS 1710-1785(MHz)

      -Downlink 1805-1880(MHz)

      • Coverage:Up to 1000m2 (Distance will be reduced when obstacles are in the way i.e. surrounding walls)
      • Gain(dB):
      • -DCS Up link 53
      • DCS Downlink 58
      • Gain adjustable range MGC≥30dB
      • Pass band ripple: DCS:15 dB
      • I/0 impedance: 50V/N Connector
      • I/0 return loss: ≤- 10 dB
      • Noise igure: ≤- 8 dB
      • Intermodulation attenuation(Po=13dBm): ≥40dBc
      • Transmission Delay: ≤0.5us
      • Guard band rejection :
      • -DCS (BW-58dB) ≤104MHz (BW-60dB) ≤107MHz
      • Power supply: AC110220V±10% 4555Hz
      • Dimensions: Signal Booster: 158 x 136 x 37 mm (L x W x D)
      • Reliabiity: To zhe GB6993-86 standard
      • Electromasnetic compatibility: To zhe ETS300 694-4 standard
      • Color:Grey

      Accessories :

      • Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 2M
      • Coaxial Cable 10M
      • Indoor Antenna Accessories and Screws

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=449 Thu, 23 Jul 2015 19:25:16 +0000 289.07 USD 449 3 1000 JM110868 http://www.alljammer.com/Array       GSM900 Mobile Phone Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=450 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=450 Wholesale GSM900 Mobile Phone Signal Booster

      Product Description

      As you know, this came with a new problem along with the benefits of mobile phones, a lack of good mobile phone coverage. In the signal dead zone or weak area, we nearly couldn’t use a cell phone. And now there is a way to enhance and amplify the cell phone signals in those areas that is mobile phone signal booster, also we call it mobile phone signal amplifier or signal repeater.

      Signal repeater is an effective device which designed to pick up the outdoor reception from service provider's cell phone tower and then the signal can be amplified. You can use it at any place which your signal is weak. The can boost signals for your cell phone. The easily install of the device make it possible to hot products in global.

      The radius range of the GSM900 mobile phone signal booster reaches to 1000 square meters, and the can used in GSM900 mobile phones. With more detailed information please check the product features and specifications.

      Notes: Long range Mobile Phone Signal Repeater! Up to 1000 square meters!
      This device is for GSM900 signals only. Please check frequency your country uses before purchasing


      Specifications

      • Frequency range:

      -Up link GSM 890-915(MHz)

      -Downlink GSM 925-960(MHz)

      • Coverage: Up to 1000m2 (Distance will be reduced when obstacles are in the way i.e. surrounding walls)
      • Gain (dB):

      -GSM Up link 65
      -GSM Downlink 70

      • Gain adjustable range MGC≥30dB
      • Pass band ripple: GSM: 4 dB
      • I/0 impedance: 50V/N Connector
      • I/0 return loss: ≤- 10 dB
      • Noise igure: ≤- 8 dB
      • Intermodulation attenuation(Po=13dBm): ≥40dBc
      • Transmission Delay: ≤0.5us
      • Guard band rejection :
      • -GSM (BW-60dB) ≤42 MHz(BW-70dB) ≤ 45 MHz
      • Power supply: AC110220V±10% 4555Hz
      • Dimensions: Signal Booster: 158 x 136 x 37 mm (L x W x D)
      • Reliabiity: To zhe GB6993-86 standard
      • Electromasnetic compatibility: To zhe ETS300 694-4 standard
      • Color:Grey


      Accessories :

      • Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 2M
      • Coaxial Cable 10M
      • Indoor Antenna Accessories and Screws

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=450 Thu, 23 Jul 2015 19:25:16 +0000 290.53 USD 450 3 1000 JM110869 http://www.alljammer.com/Array       <![CDATA[ GSM900 & 3G Dual Band Signal Booster ]]> https://www.alljammer.com/index.php?main_page=product_info&products_id=457 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=457 Wholesale GSM900 & 3G Dual Band Signal Booster

      Product Description

      Do you know what a signal booster is used for? The signal booster is used to strengthen the signal. And now what you are viewing is a GSM900 & 3G Dual Band Signal Booster, which possesses fully integrated Dual Band 900MHz and 3G antenna system. Besides including cable loss the powerful amplifier can enable up to 85 dB of signal gain. And the consistent coverage footprint can be ensured by adjust the power levels automatically as needed.

      Beside this device has the ability of intelligent signal processing and real time adaptive operation, and auto-Trac LED diagnostics displays aid install and operation. What’s more, based on the patented algorithms and adaptive processing, this product will not interfere with other wireless frequencies or radio devices and has been approve by CE.

      This one is rarely suitable for Meeting rooms, a small supermarket, small shopping malls, offices, private car, public security system, large-scale plant and so on.

      More specifications are at jammerall, if you want to buy one to make you signal stronger, this one is a good choice. And we will offer the high quality one for you at the best price.

      Specification

      • Frequency range

      -Up link:GSM 890-915/3G 1920-1980(MHz)
      -Downlink:GSM 925-960/3G 2110-2170(MHz)

      • Gain(dB)

      -GSM/3G 65/53
      -GSM/3G 70/58

      • Gain adjustable range:MGC≥30dB
      • Output power(dB):≥20
      • Pass band ripple:GSM/3G 4dB/15dB
      • Guard band rejection:GSM/3G (BW-60dB)≤42 MHz (BW-70dB)≤45 MHz / (BW-58dB)≤104MHz (BW-70dB)≤107 MHz
      • I/O impedance:50?/N Connector
      • I/O return loss:≤-10dB
      • Noise figure:≤-8dB
      • Inter-modulation attenuation:(Po=13dBm) ≥40dBc
      • Transmission Delay:≤0.5us
      • Coverage: 500-800m2 (Distance will reduced when obstacles are in the way i.e. surrounding walls)
      • Ambient temperature:-10õà0?i>
      • Power supply:AC110220V±10% 4555Hz
      • Size:158mm*136mm*37mm
      • Product weight:1.6kg
      • Reliability:To the GB6993-86 standard
      • Electromagnetic compatibility:To the ETS300 694-4 standard
      • Color:Pearl White


      Accessories

      • Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 2M
      • Coaxial Cable 10M
      • Indoor Antenna Accessories and Screws

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=457 Thu, 23 Jul 2015 19:25:16 +0000 375.20 USD 457 2 1000 JM110877 http://www.alljammer.com/Array       IEEE 802.11 b/g 2.4GHz Indoor Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=468 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=468 Wholesale IEEE 802.11 b/g 2.4GHz Indoor Signal Booster

      Product Description

      Do you want to get rid of the situation when you are surfing in internet but the network is weak? In the past years that must be a dream, but now with the invention of the IEEE 802.11b/g 2.4GHz indoor signal booster your dream has become true.

      With this 7.8cm (L) ×5.6cm (W) ×2.9cm (H) compact booster, it can add strength of the radio signal which can increase the effective range and coverage area for Wi-Fi communication. It is easy to operate, simply remove the AP/Router RP-SMA antenna and plug it into the booster female RP-SMA connector. And even it can penetrate complex environments with many walls and obstacles. The amplifier can save lots of wiring costs and easy to build.

      The operating range of the IEEE 802.11b/g 2.4GHz indoor signal booster is 2400-2500MHz. if you want to amplify the signal of your network; this device is a best choice for you. Just go ahead; put it into your cart, it will bring out great convenience for you!


      Technical Specifications

      • Operating Range: 2400~2500MHz
      • Operating Mode: Bi-directional, half-duplex, time division duplex senses RF
      • Carrie from transmitter and automatically switch receiving to transmitting
      • Connector Type: SMA Receptacle (50ohm)
      • Input Power: 0~15dbm (warning: Input power more than 15dbm that power amplifier may breakdown)
      • Transmit Gain: 12~15db
      • Output Power:0.5W/1.0W
      • Receiver Gain:Q12dbm
      • Noise Figure: 3.5db
      • Frequency Response:±1db over operating range
      • Power Adaptor: 5~6V/DC 105-240V for AC Adapter
      • Operating Temp:-20 to +70?i>
      • Operating Humidity: Up to 75% relative humidity
      • Material: Cast Aluminum
      • LED: Transmit Active (Green)
      • Booster(cm):7.8cm(L)×5.6cm(W)×2.9cm(H)


      Accessories

      • Indoor Wireless Amplifier
      • Power Supply
      • User Manual

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=468 Thu, 23 Jul 2015 19:25:16 +0000 102.66 USD 468 2 1000 JM132804 http://www.alljammer.com/Array       GSM900MHz Mobile Phone Signal Booster with AGC https://www.alljammer.com/index.php?main_page=product_info&products_id=482 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=482 Wholesale GSM900MHz Mobile Phone Signal Booster with AGC

      Product Description

      Want to gain a more fluently talk through the mobile phone when you are making or receiving the call? If the frequency band of your cell phone is GSM900MHz, then this GSM900MHz Mobile Phone Signal Booster with AGC can be your best choice.

      As this mobile phone signal booster owns the ability of providing quick coverage solution for small signal weak & block zones, and reduce drop/off calls, so that you can enjoy the talking without worrying about weak signal. Besides this signal booster also owns the characteristic of compact size, low consumption, easy installation, great cover. And the max cover can reach up to 150 square meters at most.

      Besides by using such kind of device, it will reduce cellphone transmit power and radiation, extend cellphone battery life, which is beneficial for both the cell phone and people’s health. Apart from this it owns the design of Low gain low noise figure, high linear design, low interference to BTS and with ALC (automatic gain control) Gain and Power control. So this mobile phone signal booster is of high quality.

      More details about the specifications are here. If you are looking for one to help you solve the problem, just come here and pick up one. Then you will of course get one with both high quality and reasonable price.

      Specification

      • Frequency :

      -Uplink:890-915mhz
      -Downlink:935-960mhz

      • Max Gain:

      -Uplink:53-57dB
      -Downlink:58-62dB

      • Bandwidth:25MHZ
      • Ripple in Band:Q8dB
      • Max. Input Power:Without Damage 0 dBm
      • Output Power:

      -Uplink:10dBm
      -Downlink:14 dBm

      • Noise Figure @ max. gain:

      -Uplink:4.5db
      -Downlink:8db

      • Coverage: 100-150m2 (Distance will be reduced when obstacles are in the way i.e. surrounding walls)
      • Return loss:Q -8 dB
      • Time Delay:Q0.5 μs
      • MTBF: 20000 hours
      • Power Supply:AC90~265V 50/ 60HzDC5V 2A
      • Power Consumption:4W
      • Impedance:50 Ω
      • RF Connector:N -Female
      • Cooling Heatsink Convection cooling
      • Dimensions (D x W xH ):130*95*28mm
      • Weight:0.5KG
      • Installation Type:Wall Installation
      • Environment Conditions:IP40
      • Humidity:< 90%
      • Operating Temperature:-10Ú¹55?i>

      Accessories

      • Cell Phone Signal Booster
      • Indoor Antenna
      • Outdoor Antenna
      • Power Adapter
      • Coaxial Cable 15M
      • Indoor Antenna Accessories and Screws
      • User Manual

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=482 Thu, 23 Jul 2015 19:25:16 +0000 256.40 USD 482 0.5 1000 JM165022 http://www.alljammer.com/Array       Mini Portable CDMA850 Cell Phone Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=537 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=537 Wholesale Mini Portable CDMA850 Cell Phone Signal Booster

      Product Description

      Cell phone booster is the gadget design to amplify cell phone signal whenever there is signal reception trouble. But most boosters on the market will inevitably require a few steps to installation to get it work. However, you will have better solution from now on with this latest released mini portable CDMA850 cell phone signal booster.

      This is a mini compact size portable cell phone repeater with delicate and fashionable outside looking. More importantly, it is an installation free phone signal repeater, which will provide you the easiest solution by simply carrying it along with you. It can efficiently improve your phone conversation quality with a range of 1-30 square meter.

      The mini cell phone amplifier is able to automatically adjust the uplink and downlink gain. It is also designed with isolation checking function, power indication as well as automatic installation indication. Capable of intelligently working, it will need no testing tool at all.

      The cell phone signal booster will be the right-hand assistant in any blindside area of cell phone signal. Featured ease of use and high portability, the powerful small gadget will be suitable for a variety of locations, home, office, travel, KTV, underground bar and so on.

      Specification:

      • Frequency range:

      -Up link CDMA 824-849MHz
      -Downlink CDMA 869-894MHz

      • Pass band ripple:<6.0dB
      • Max gain:45±2dB
      • Gain Adjust Range:43dB-47dB
      • Max Export power:

      -Uplink:5±2dB
      -Downlink:5±2dB

      • AGC:Automatic gain adjustment rang 20dB
      • Noise figure(reverse):<7dB(Max Gain)(
      • Intermodulation Attenuation:

      -9KHz-1GHz ≤-36dBm @ 3KHz
      -1GHz-12.75GHz ≤-36dBm @ 3KHz

      • Out of band spuriousemission:

      -9KHz-1GHz ≤-36dBm @ 3KHz
      -1GHz-12.75GHz ≤-36dBm @ 3KHz

      • Transmission delay:<5us
      • VSWR:<1:2
      • Ambient temperature:-10õà0?i>
      • Indicator:
      • -ISO red (Isolation testing)
      • -UP green (uplink power)
      • -DN green (downlink power)
      • Power Supply:DC 5V
      • I/O impedance:50Ω
      • input/output connector:SMA
      • Color:Brown
      • Weight:300g

      Accessories:

      • Mini CDMA850 Cell Phone Signal Booster
      • Power Adaptor
      • USB Cable
      • Antenna
      • User Manual

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=537 Thu, 23 Jul 2015 19:25:16 +0000 226.99 USD 537 1 1000 JM171546 http://www.alljammer.com/Array       Mini Portable 3G Cell Phone Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=538 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=538 Wholesale Mini Portable 3G Cell Phone Signal Booster

      Product Description

      Isn’t it annoying to lose signal when you just pick up the phone to make a call? You must have ever experienced the frustration before, more or less. If it happen to be an emergency, the situation would be worse. Now we have variety of cell phone signal boosting gadget to avoid the inconvenience. Here is one of the best recently developed solutions as this mini portable 3G cell phone signal booster.

      The mobile phone signal booster is a highly accessible gadget to reduced dropped calls an improve voice quality of phone conversation. Of very compact size, it takes no effort at all to carry it along with your cell phone. What is more important, unlike other units of mobile phone amplifier produced before, this one requires no manual installation at all. It will automatically work boosting the signal strength within a range of 1-30 square meter. Additionally, the gadget is constructed as exquisitely as a craft with durability through all-at-once molding and injection processing.

      The usage area for the signal booster is various. You can use it both at home, entertainment sites, conference room, office etc for better quality phone conversation. Also, it will work for those signal blind spot of business trip, traveling, outdoor tip etc.

      Specification:

      • Frequency range:

      -Up link 3G 1930-1990MHz
      -Downlink 3G 2110-2170MHz

      • Pass band ripple:<6.0dB
      • Max gain:45±2dB
      • Gain Adjust Range:43dB-47dB
      • Max Export power:

      -Uplink:5±2dB
      -Downlink:5±2dB

      • AGC:Automatic gain adjustment rang 20dB
      • Noise figure(reverse):<7dB(Max Gain)(
      • Intermodulation Attenuation:

      -9KHz-1GHz ≤-36dBm @ 3KHz
      -1GHz-12.75GHz ≤-36dBm @ 3KHz

      • Out of band spuriousemission:

      -9KHz-1GHz ≤-36dBm @ 3KHz
      -1GHz-12.75GHz ≤-36dBm @ 3KHz

      • Transmission delay:<5us
      • VSWR:<1:2
      • Ambient temperature:-10õà0?i>
      • Indicator:

      -ISO red (Isolation testing)
      -UP green (uplink power)
      -DN green (downlink power)

      • Power Supply:DC 5V
      • I/O impedance:50Ω
      • input/output connector:SMA
      • Color:Silver
      • Weight:300g


      Accessories:

      • Mini 3G Mobile Phone Signal Repeater
      • Power Adaptor
      • USB Cable
      • Antenna
      • User Manual

      This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall.


      Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=538 Thu, 23 Jul 2015 19:25:16 +0000 232.99 USD 538 1 1000 JM171548 http://www.alljammer.com/Array       CDMA800 Mobile Phone Signal Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=553 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=553 Wholesale CDMA800 Mobile Phone Signal BoosterProduct Description Its really a nuisance thing when youre in a conversation and the call suddenly ends due to the phone signal being lost or totally weak. If you have such troubles or live in an area with weak signal coverage, a mobile phone is a will help you to gain a stronger signal. And this CDMA 800MHz mobile phone signal booster can improve you cellular phone signal. The cell phone boosters help us to achieve long distance and more reliable communications. The cell phone coverage can be increased to cover an area of 1000 square meters. The booster works easily with all CDMA in the range of 800MHz. More details please see below specific specifications. If youre looking for a signal booster that truly works well, you could pay attention to this mobile phone signal booster. The device will lead to reduced dropped calls and even help you to extend your cell phone range. Notes: Long range Mobile Phone Signal Repeater! Up to 1000 square meters! This device is for CDMA 800MHz signals only. Please check frequency your country uses before purchasing Specifications Frequency range: -Up link CDMA 824-849MHz -Downlink CDMA 869-894MHz Coverage:Up to 1000m2 (Distance will be reduced when obstacles are in the way i.e. surrounding walls) Gain (dB): -CDMA Up link 65 -CDMA Downlink 70 Gain adjustable range MGC?0dB Pass band ripple: CDMA: 4 dB I/0 impedance: 50V/N Connector I/0 return loss: ? 10 dB Noise igure: ? 8 dB Intermodulation attenuation(Po=13dBm): ?0dBc Transmission Delay: ?.5us Guard band rejection : CDMA (BW-60dB) ?2 MHz(BW-70dB) ?45 MHz Power supply: AC110220V10% 4555Hz Dimensions: Signal Booster: 158 x 136 x 37 mm (L x W x D) Reliabiity: To zhe GB6993-86 standard Electromasnetic compatibility: To zhe ETS300 694-4 standard Color:White Accessories: Signal Booster Indoor Antenna Outdoor Antenna Power Adapter Coaxial Cable 2M Coaxial Cable 10M Indoor Antenna Accessories and Screws This product is in stock now, we guarantee shipping within 24 hours and offer 1 year warranty for all our products. Brought to you by the leader in security devices and best Signal Jammers, Jammerall. Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html

      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=553 Thu, 23 Jul 2015 19:25:16 +0000 290.36 USD 553 3 1000 JM110865 http://www.alljammer.com/Array       ABS-3G950 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=271 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=271 Wholesale ABS-3G950 Mobile Phone Signal Repeater/Amplifier/Booster
      Detailed Product Description

      A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

      Introduction to Mobile Phone Signal Repeater

      1. Enhance Mobile Phone Signal Strength
      2. Improve Communication Quality
      3. Reduce Cellphone Radiation
      4. Protract Cellular Battery Life
      5. Economic Building Cost
      6. Easy Operation
      7. Easy Installation
      8. Build-in Power Supply

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      Uplink:1930~1990MHz

      Downlink 2110~2180MHz

      Gain ( dB)

      Uplink Gp≥55 Downlink Gp≥60

      Export power (Po)

      ≥17dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?0?/span>

      Power supply

      AC110?40V 45?5Hz

      Size

      220 x180 x 20 mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic

      compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote

      b) Export power LED denote

      coverage area

      200 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If can not call out, please adjust the direction of outdoor antenna.
        3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20

      Accessories
      SelectionOutdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc

      SpecificationsInstallation Sketch Map



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=271 Thu, 23 Jul 2015 19:25:15 +0000 120.00 USD 271 1 1000 ABS-3G950 http://www.alljammer.com/Array       ABS-3G980 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=308 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=308 Wholesale ABS-3G980 Mobile Phone Signal Repeater/Amplifier/Booster

      Detailed Product Description

      A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

      Introduction to Mobile Phone Signal Repeater

      l Enhance Mobile Phone Signal Strength

      l Improve Communication Quality

      l Reduce Cellphone Radiation

      l Protract Cellular Battery Life

      l Economic Building Cost

      l Easy Operation

      l Easy Installation

      l Build-in Power Supply

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      Uplink:1930~1990MHz
      Downlink 2110~2180MHz

      Gain ( dB)

      Uplink Gp≥60 Downlink Gp≥65

      Export power (Po)

      ≥20dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?/span>?/span>60?/span>

      Power supply

      AC110?/span>240V 45?/span>55Hz

      Size

      220 x180 x 20 mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      1000 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to signal tower.
      2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
      3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
      4. Plug power adaptor into AC power socket and finish installation.

      Technique Supporting

      1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
      2. If cannot call out, please adjust the direction of outdoor antenna.
      3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

      Accessories
      Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

      Packing list
      Main unit 1pc
      Power supply 1pc
      User manual 1pc

      SpecificationsInstallation Sketch Map



      Buy Now ]]>       alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=308 Thu, 23 Jul 2015 19:25:15 +0000 150.00 USD 308 3.5 999 ABS-3G980 http://www.alljammer.com/Array       ABS-DCS950 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=277 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=277 Wholesale ABS-DCS950 Mobile Phone Signal Repeater/Amplifier/Booster

      Detailed Product Description

      A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

      Introduction to Mobile Phone Signal Repeater

      l Enhance Mobile Phone Signal Strength

      l Improve Communication Quality

      l Reduce Cellphone Radiation

      l Protract Cellular Battery Life

      l Economic Building Cost

      l Easy Operation

      l Easy Installation

      l Build-in Power Supply

      The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

      Features

      l High gain, easy installation and operation.

      l Full-duplex, single-port design, build-in power supply.

      l Use ALC technology, adjust extent automatically

      l LED Light Working & Signal Condition Indicators

      l Big linear power, control intermodulation & saturation stably

      l Dependability stand by GB6993-86 standard

      l Compatibility of electromagnetism according with ETS300 609-4

      l CE and RoHs Approved

      Technique

      Frequency range

      Uplink:1710~1785MHz
      Downlink 1805~1880MHz

      Gain ( dB)

      Uplink Gp≥60 Downlink Gp≥65

      Export power (Po)

      ≥17dBm

      Pass band ripple

      ≤3dB

      I/O impedance

      50Ω/N connector

      Noise figure

      ≤4dB

      Transmission Delay

      ≤0.5μs

      Ambient temperature

      -10?/span>?/span>60?/span>

      Power supply

      AC110?/span>240V 45?/span>55Hz

      Size

      220 x 140 x 40 mm

      Reliability

      To the GB6993-86 standard

      Electromagnetic compatibility

      To the ETS300 694-4 standard

      Function

      a) Power supply LED denote
      b) Export power LED denote

      coverage area

      200 m2

      Installation Approaches

      1. Fix up outdoor antenna reception on housetop and point to s

        Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=277 Thu, 23 Jul 2015 19:25:15 +0000 100.00 USD 277 2 1000 ABS-DCS950 4 http://www.alljammer.com/Array ABS-DCS980 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=278 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=278 Wholesale ABS-DCS980 Mobile Phone Signal Repeater/Amplifier/Booster

        Detailed Product Description

        A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

        Introduction to Mobile Phone Signal Repeater

        l Enhance Mobile Phone Signal Strength

        l Improve Communication Quality

        l Reduce Cellphone Radiation

        l Protract Cellular Battery Life

        l Economic Building Cost

        l Easy Operation

        l Easy Installation

        l Build-in Power Supply

        The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

        Features

        l High gain, easy installation and operation.

        l Full-duplex, single-port design, build-in power supply.

        l Use ALC technology, adjust extent automatically

        l LED Light Working & Signal Condition Indicators

        l Big linear power, control intermodulation & saturation stably

        l Dependability stand by GB6993-86 standard

        l Compatibility of electromagnetism according with ETS300 609-4

        l CE and RoHs Approved

        Technique

        Frequency range

        Uplink:1710~1785MHz
        Downlink 1805~1880MHz

        Gain ( dB)

        Uplink Gp≥60 Downlink Gp≥65

        Export power (Po)

        ≥27dBm

        Pass band ripple

        ≤3dB

        I/O impedance

        50Ω/N connector

        Noise figure

        ≤4dB

        Transmission Delay

        ≤0.5μs

        Ambient temperature

        -10?/span>?/span>60?/span>

        Power supply

        AC110?/span>240V 45?/span>55Hz

        Size

        220 x 140 x 40 mm

        Reliability

        To the GB6993-86 standard

        Electromagnetic compatibility

        To the ETS300 694-4 standard

        Function

        a) Power supply LED denote
        b) Export power LED denote

        coverage area

        1000 m2

        Installation Approaches

        1. Fix up outdoor antenna reception on housetop and point to signal tower.
        2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
        3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
        4. Plug power adaptor into AC power socket and finish installation.

        Technique Supporting

        1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
        2. If cannot call out, please adjust the direction of outdoor antenna.
        3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

        Accessories
        Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

        Packing list
        Main unit 1pc
        Power supply 1pc
        User manual 1pc

        SpecificationsInstallation Sketch Map



        Buy Now ]]>         alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=278 Thu, 23 Jul 2015 19:25:15 +0000 250.00 USD 278 2 1000 ABS-DCS980 http://www.alljammer.com/Array         ABS-GSM950 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=283 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=283 Wholesale ABS-GSM950 Mobile Phone Signal Repeater/Amplifier/Booster

        Detailed Product Description

        A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

        Introduction to Mobile Phone Signal Repeater

        l Enhance Mobile Phone Signal Strength

        l Improve Communication Quality

        l Reduce Cellphone Radiation

        l Protract Cellular Battery Life

        l Economic Building Cost

        l Easy Operation

        l Easy Installation

        l Build-in Power Supply

        The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

        Features

        l High gain, easy installation and operation.

        l Full-duplex, single-port design, build-in power supply.

        l Use ALC technology, adjust extent automatically

        l LED Light Working & Signal Condition Indicators

        l Big linear power, control intermodulation & saturation stably

        l Dependability stand by GB6993-86 standard

        l Compatibility of electromagnetism according with ETS300 609-4

        l CE and RoHs Approved

        Technique

        Frequency range

        Uplink:890—915MHZ
        Downlink 935-960MHz

        Gain ( dB)

        Uplink Gp≥60 Downlink Gp≥65

        Export power (Po)

        ≥17dBm

        Pass band ripple

        ≤3dB

        I/O impedance

        50Ω/N connector

        Noise figure

        ≤4dB

        Transmission Delay

        ≤0.5μs

        Ambient temperature

        -10?/span>?/span>60?/span>

        Power supply

        AC110?/span>240V 45?/span>55Hz

        Size

        220 x 140 x 40 mm

        Reliability

        To the GB6993-86 standard

        Electromagnetic compatibility

        To the ETS300 694-4 standard

        Function

        a) Power supply LED denote
        b) Export power LED denote

        coverage area

        200 m2

        Installation Approaches

        1. Fix up outdoor antenna reception on housetop and point to signal tower.
        2. Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=283 Thu, 23 Jul 2015 19:25:15 +0000 100.00 USD 283 3.5 1000 ABS-GSM950 http://www.alljammer.com/Array ABS-GSM960 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=284 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=284 Wholesale ABS-GSM960 Mobile Phone Signal Repeater/Amplifier/Booster

          Detailed Product Description

          A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

          Introduction to Mobile Phone Signal Repeater

          l Enhance Mobile Phone Signal Strength

          l Improve Communication Quality

          l Reduce Cellphone Radiation

          l Protract Cellular Battery Life

          l Economic Building Cost

          l Easy Operation

          l Easy Installation

          l Build-in Power Supply

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink:890—915MHZ
          Downlink 935-960MHz

          Gain ( dB)

          Uplink Gp≥60 Downlink Gp≥65

          Export power (Po)

          ≥20dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          220 x 140 x 40 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Buy Now ]]> alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=284 Thu, 23 Jul 2015 19:25:15 +0000 120.00 USD 284 3.5 1000 ABS-GSM960 http://www.alljammer.com/Array ABS-GSM970 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=285 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=285 Wholesale ABS-GSM970 Mobile Phone Signal Repeater/Amplifier/Booster

          Detailed Product Description

          A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

          Introduction to Mobile Phone Signal Repeater

          l Enhance Mobile Phone Signal Strength

          l Improve Communication Quality

          l Reduce Cellphone Radiation

          l Protract Cellular Battery Life

          l Economic Building Cost

          l Easy Operation

          l Easy Installation

          l Build-in Power Supply

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink:890—915MHZ
          Downlink 935-960MHz

          Gain ( dB)

          Uplink Gp≥60 Downlink Gp≥65

          Export power (Po)

          ≥23dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          220 x 140 x 40 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          1000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          SpecificationsInstallation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=285 Thu, 23 Jul 2015 19:25:15 +0000 100.00 USD 285 3.5 1000 ABS-GSM970 http://www.alljammer.com/Array           ABS-GSM980 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=286 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=286 Wholesale ABS-GSM980 Mobile Phone Signal Repeater/Amplifier/Booster

          Detailed Product Description

          A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

          Introduction to Mobile Phone Signal Repeater

          l Enhance Mobile Phone Signal Strength

          l Improve Communication Quality

          l Reduce Cellphone Radiation

          l Protract Cellular Battery Life

          l Economic Building Cost

          l Easy Operation

          l Easy Installation

          l Build-in Power Supply

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink:890—915MHZ
          Downlink 935-960MHz

          Gain ( dB)

          Uplink Gp≥60 Downlink Gp≥65

          Export power (Po)

          ≥27dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          220 x 140 x 40 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          SpecificationsInstallation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=286 Thu, 23 Jul 2015 19:25:15 +0000 110.00 USD 286 3.5 1000 ABS-GSM980 http://www.alljammer.com/Array           ABS-GSM990 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=287 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=287 Wholesale ABS-GSM990 Mobile Phone Signal Repeater/Amplifier/Booster

          Detailed Product Description

          A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

          Introduction to Mobile Phone Signal Repeater

          1. Enhance Mobile Phone Signal Strength
          2. Improve Communication Quality
          3. Reduce Cellphone Radiation
          4. Protract Cellular Battery Life
          5. Economic Building Cost
          6. Easy Operation
          7. Easy Installation
          8. Build-in Power Supply

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & scatteration stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink 890-915MHZ
          Downlink 935-960MHZ

          Gain ( dB)

          Uplink Gp≥70

          Downlink Gp≥75

          Pass band ripple

          ≤5dB

          Guard band rejection

          (BW-60dB)≤42MHz , (BW-70dB)≤45MHz

          I/O impedance

          50Ω/N connector

          I/O return loss

          ≤-3B

          Export power (Po)

          ≥33dBm

          Intermodulation
          Attenuation(Po=33dBm)

          ≤-40dBc

          Transmission Delay

          ≤0.5μs

          Ambient Temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          240 x 175 x 45 mm

          coverage area

          5000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.

          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.

          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.

          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.

          2. If can not call out, please adjust the direction of outdoor antenna.

          If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20

          Accessories


          SelectionOutdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list


          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          SpecificationsInstallation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=287 Thu, 23 Jul 2015 19:25:15 +0000 150.00 USD 287 2 1000 ABS-GSM990 http://www.alljammer.com/Array           ABS-MINI DCS Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=288 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=288 Wholesale ABS-MINI DCS Mobile Phone Signal Repeater/Amplifier/Booster

          Detailed Product Description

          A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

          Introduction to Mobile Phone Signal Repeater

          1. Enhance Mobile Phone Signal Strength
          2. Improve Communication Quality
          3. Reduce Cellphone Radiation
          4. Protract Cellular Battery Life
          5. Economic Building Cost
          6. Easy Operation
          7. Easy Installation
          8. Build-in Power Supply

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink 1710--1785MHZ Downlink1805--1880MHz

          Gain ( dB)

          Uplink Gp≥60 Downlink Gp≥65

          Export power (Po)

          ≥23dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient Temperature

          -10?0?/span>

          Power supply

          AC110?40V 45?5Hz

          Size

          160 x 60 x 20 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          50 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.

          If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          Specifications Installation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=288 Thu, 23 Jul 2015 19:25:15 +0000 90.00 USD 288 1 1000 ABS-MINIDCS http://www.alljammer.com/Array           ABS-CDMA950 Mobile Phone Signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=307 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=307 Wholesale ABS-CDMA950 Mobile Phone Signal Repeater/Amplifier/Booster

          Detailed Product Description

          A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.

          Introduction to Mobile Phone Signal Repeater

          l Enhance Mobile Phone Signal Strength

          l Improve Communication Quality

          l Reduce Cellphone Radiation

          l Protract Cellular Battery Life

          l Economic Building Cost

          l Easy Operation

          l Easy Installation

          l Build-in Power Supply

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink:824—849MHZ
          Downlink 869-894MHz

          Gain ( dB)

          Uplink Gp≥50 Downlink Gp≥55

          Export power (Po)

          ≥17dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          220 x 140 x 40 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          200 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.

          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.

          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.

          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.

          2. If can not call out, please adjust the direction of outdoor antenna.

          If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20

          Accessories


          SelectionOutdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list


          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          SpecificationsInstallation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=307 Thu, 23 Jul 2015 19:25:15 +0000 90.00 USD 307 3.5 1000 ABS-CDMA950 http://www.alljammer.com/Array           ABS-14-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=310 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=310 Wholesale ABS-14-1G GSM signal Repeater/Amplifier/Booster

          Detailed Product Description

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink 890-915MHz
          Downlink 935-960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥14dBm

          Pass band ripple

          ≤5dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤6dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          145 x 120 x 30 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          600 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          SpecificationsInstallation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=310 Thu, 23 Jul 2015 19:25:15 +0000 80.00 USD 310 3.5 1000 ABS-14-1G http://www.alljammer.com/Array           ABS-23-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=311 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=311 Wholesale ABS-23-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥23dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=311 Thu, 23 Jul 2015 19:25:15 +0000 100.00 USD 311 3.5 1000 ABS-23-1G 4 http://www.alljammer.com/Array           ABS-25-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=312 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=312 Wholesale ABS-25-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥25dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=312 Thu, 23 Jul 2015 19:25:15 +0000 110.00 USD 312 3.5 1000 ABS-25-1G http://www.alljammer.com/Array           ABS-30-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=313 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=313 Wholesale ABS-30-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥30dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          3500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=313 Thu, 23 Jul 2015 19:25:15 +0000 675.00 USD 313 3.5 1000 ABS-30-1G http://www.alljammer.com/Array           ABS-33-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=314 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=314 Wholesale ABS-33-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥33dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          4000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=314 Thu, 23 Jul 2015 19:25:15 +0000 725.00 USD 314 3.5 1000 ABS-33-1G http://www.alljammer.com/Array           ABS-23-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=315 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=315 Wholesale ABS-23-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥23dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=315 Thu, 23 Jul 2015 19:25:15 +0000 100.00 USD 315 3.5 1000 ABS-23-1C http://www.alljammer.com/Array           ABS-25-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=316 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=316 Wholesale ABS-25-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥25dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=316 Thu, 23 Jul 2015 19:25:15 +0000 110.00 USD 316 3.5 1000 ABS-25-1C http://www.alljammer.com/Array           ABS-30-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=317 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=317 Wholesale ABS-30-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥27dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          3500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=317 Thu, 23 Jul 2015 19:25:15 +0000 580.00 USD 317 3.5 1000 ABS-30-1C http://www.alljammer.com/Array           ABS-17-1I IDEN signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=318 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=318 Wholesale ABS-17-1I IDEN signal Repeater/Amplifier/Booster

          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=318 Thu, 23 Jul 2015 19:25:15 +0000 212.50 USD 318 3.5 1000 ABS-17-1I http://www.alljammer.com/Array           ABS-17-1D DCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=319 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=319 Wholesale ABS-17-1D DCS signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range DCS1800

          1710—1785MHz
          1805—1880MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥17dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          800 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=319 Thu, 23 Jul 2015 19:25:15 +0000 225.00 USD 319 3.5 1000 ABS-17-1D http://www.alljammer.com/Array           ABS-20-1D DCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=320 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=320 Wholesale ABS-20-1D DCS signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range DCS1800

          1710—1785MHz
          1805—1880MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥20dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          1000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=320 Thu, 23 Jul 2015 19:25:15 +0000 250.00 USD 320 3.5 1000 ABS-20-1D http://www.alljammer.com/Array           ABS-27-1D DCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=321 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=321 Wholesale ABS-27-1D DCS signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range DCS1800

          1710—1785MHz
          1805—1880MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥27dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=321 Thu, 23 Jul 2015 19:25:15 +0000 675.00 USD 321 3.5 1000 ABS-27-1D http://www.alljammer.com/Array           ABS-30-1D DCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=322 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=322 Wholesale ABS-30-1D DCS signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range DCS1800

          1710—1785MHz
          1805—1880MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥30dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          3000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=322 Thu, 23 Jul 2015 19:25:15 +0000 725.00 USD 322 3.5 1000 ABS-30-1D 4 http://www.alljammer.com/Array           ABS-30-1P PCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=324 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=324 Wholesale ABS-30-1P PCS signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range PCS1900

          1850—1910MHz1930—1990MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥30dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=324 Thu, 23 Jul 2015 19:25:15 +0000 725.00 USD 324 2 1000 ABS-30-1P http://www.alljammer.com/Array           ABS-17-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=330 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=330 Wholesale ABS-17-1G GSM signal Repeater/Amplifier/Booster

          Detailed Product Description

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink 890-915MHz
          Downlink 935-960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥17dBm

          Pass band ripple

          ≤5dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤6dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          145 x 120 x 30 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          1200 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          SpecificationsInstallation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=330 Thu, 23 Jul 2015 19:25:15 +0000 90.00 USD 330 2 1000 ABS-17-1G http://www.alljammer.com/Array           ABS-27-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=331 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=331 Wholesale ABS-27-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥27dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          3000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=331 Thu, 23 Jul 2015 19:25:15 +0000 550.00 USD 331 2 1000 ABS-27-1G http://www.alljammer.com/Array           ABS-37-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=332 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=332 Wholesale ABS-37-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥37dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          4500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=332 Thu, 23 Jul 2015 19:25:15 +0000 1000.00 USD 332 2 1000 ABS-37-1G http://www.alljammer.com/Array           ABS-40-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=333 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=333 Wholesale ABS-40-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥40dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          5000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=333 Thu, 23 Jul 2015 19:25:15 +0000 1200.00 USD 333 2 1000 ABS-40-1G http://www.alljammer.com/Array           ABS-43-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=334 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=334 Wholesale ABS-43-1G GSM signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          890915MHz,
          935          960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥43dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          5500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=334 Thu, 23 Jul 2015 19:25:15 +0000 1500.00 USD 334 2 1000 ABS-43-1G http://www.alljammer.com/Array           ABS-10-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=335 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=335 Wholesale ABS-10-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥10dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          200 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=335 Thu, 23 Jul 2015 19:25:15 +0000 70.00 USD 335 2 1000 ABS-10-1C http://www.alljammer.com/Array           ABS-14-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=336 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=336 Wholesale ABS-14-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥14dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          600 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=336 Thu, 23 Jul 2015 19:25:15 +0000 80.00 USD 336 2 1000 ABS-14-1C http://www.alljammer.com/Array           ABS-17-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=337 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=337 Wholesale ABS-17-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥17dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          1200 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=337 Thu, 23 Jul 2015 19:25:15 +0000 90.00 USD 337 2 1000 ABS-17-1C http://www.alljammer.com/Array           ABS-33-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=338 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=338 Wholesale ABS-33-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥33dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          4000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=338 Thu, 23 Jul 2015 19:25:15 +0000 620.00 USD 338 2 1000 ABS-33-1C http://www.alljammer.com/Array           ABS-37-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=339 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=339 Wholesale ABS-37-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥37dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          4500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=339 Thu, 23 Jul 2015 19:25:15 +0000 990.00 USD 339 2 1000 ABS-37-1C http://www.alljammer.com/Array           ABS-40-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=340 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=340 Wholesale ABS-40-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥40dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          5000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=340 Thu, 23 Jul 2015 19:25:15 +0000 1200.00 USD 340 2 1000 ABS-40-1C http://www.alljammer.com/Array           ABS-43-1C CDMA signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=341 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=341 Wholesale ABS-43-1C CDMA signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range CDMA800(GSM850)

          824849MHz
          869          894MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥43dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          5500 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=341 Thu, 23 Jul 2015 19:25:15 +0000 1500.00 USD 341 2 1000 ABS-43-1C http://www.alljammer.com/Array           ABS-20-1P PCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=342 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=342 Wholesale ABS-20-1P PCS signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range PCS1900

          1850—1910MHz1930—1990MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥20dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          1000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=342 Thu, 23 Jul 2015 19:25:15 +0000 150.00 USD 342 2 1000 ABS-20-1P http://www.alljammer.com/Array           ABS-27-1P PCS signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=343 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=343 Wholesale ABS-27-1P PCS signal Repeater/Amplifier/Booster

          Product Description

          The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range PCS1900

          1850—1910MHz1930—1990MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥27dBm

          Pass band ripple

          ≤3dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤4dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?pan>60?pan>

          Power supply

          AC110240V 4555Hz

          Size

          204×120×37mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          2000 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=343 Thu, 23 Jul 2015 19:25:15 +0000 500.00 USD 343 2 1000 ABS-27-1P http://www.alljammer.com/Array           Cell Phone Signal Booster for GSM 900MHz https://www.alljammer.com/index.php?main_page=product_info&products_id=115 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=115 Wholesale Cell Phone Signal Booster for GSM 900MHz

          Product Description

          Features

          • High-gain linear power amplifier
          • ALC technology
          • Ultra-low noise receive amplifier
          • There is no interference to the base station, after the opening the original system and the base station without the need to adjust parameters
          • Stable and reliable electromagnetic compatibility design
          • The base station does not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications
          • With full-duplex communication mode

          Technical Specifications

          • Working system: GSM
          • Frequency range:
            -uplink: 890-915MHz
            -Downlink: 935~960MHz
          • Output up:
            -Up link :18dBm
            -Downlink: 20dBm
          • Port VSWR:≤1.8DB
          • Noise figure:≤6dB
          • Ambient temperature:-15??i>
          • Gain:
            -Up link: Gp≥40dB
            -Downlink: Gp≥45dB
          • Function:
            -Power supply LED denote
            -Export power LED denote
          • I/O impedence: 50Ω/N connector
          • Transmission delay:≤0.5μs
          • Power supply: AC110-240V
          • Coverage area: 100Sqm
          • Size: 170mm×105mm×30mm

          Accessories

          • AC adaptor
          • Indoor Antenna
          • Outdoor Antenna
          • Coaxial cable1 (5m)
          • Coaxial cable2 (10m)
          • User manual

          Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=115 Thu, 23 Jul 2015 19:25:14 +0000 129.00 USD 115 1 1000 JM165007 http://www.alljammer.com/Array           Cell Phone Signal Booster for CDMA850 https://www.alljammer.com/index.php?main_page=product_info&products_id=120 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=120 Wholesale Cell Phone Signal Booster for CDMA850

          Product Description

          This Cell Phone Signal Booster for CDMA850 can be widely used in the following small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc. Also this booster is popular with small-scale hot-spot signal Complaints areas, such as conference rooms ,a small supermarket, small shopping malls ,the office and small public areas ,etc. Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs and leisure etc. Some other occasions you can also see it. Elevator, lift wells in particular, home, office, luxury yachts, private cars, public security system and road safety management, etc.

          Different situations may use it for different purposes, if you need this booster for improving your calling life. You have come to the right place. Pick out one patiently.

          Cell Phone Signal Booster for CDMA850 Specification

          • Working System: CDMA850
          • Frequency range

          -Uplink 824-849MHz

          -Downlink 869-894MHz

          • GainUp link: Gp ≥61dB,Downlink: Gp≥65dB
          • Output up: Up link 25dBm, Down link 25dBm
          • Function:
          • -Power supply LED denote
          • -Export power LED denote
          • Port VSWR:≤1.8DB
          • I/O impedence: 50Ω/N connector
          • ALC:≥10dB
          • In-Band ripple:≤6dB
          • Noise figure:≤6dB
          • Transmission delay:≤0.5μs
          • Net Weight: 1.07KG
          • Power supply: AC/110-220V±10% 4555Hz
          • Size: 198mm×148mm×39mm
          • Coverage area: 60Sqm

          Accessories

          • Cell Phone Signal Booster
          • Indoor Antenna
          • Outdoor Antenna
          • Power Adapter
          • Coaxial Cable 5M
          • Coaxial Cable 10M
          • Indoor Antenna Accessories and Screws
          • User Manual

          Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=120 Thu, 23 Jul 2015 19:25:14 +0000 301.00 USD 120 2 1000 JM165016 http://www.alljammer.com/Array           Cell Phone Signal Booster for DCS 1800MHz https://www.alljammer.com/index.php?main_page=product_info&products_id=121 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=121 Wholesale Cell Phone Signal Booster for DCS 1800MHz

          Product Description

          If you are still bored with the weak signals time when you are making important calls, improve your phone life, start from here, and directly purchase this Cell Phone Signal Booster for DCS 1800MHz for adding more security for your present life.

          This booster is popular with small-scale hot-spot signal Complaints areas, such as conference rooms ,a small supermarket, small shopping malls ,the office and small public areas ,etc. Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs and leisure etc.

          What are you hesitating about? In order to escape the boring no signals life, you should make up your mind to take this cell phone signals with you.

          Cell Phone Signal Booster for DCS 1800MHz Specification

          • Working System: DCS1800MHz
          • Frequency range

          -Uplink1710-1785MHz

          -Downlink 1805-1880MHz

          • GainUp link: Gp ≥63dB,Downlink: Gp≥65dB
          • Output up: Up link 23dBm, Down link 25dBm
          • Function:

          -Power supply LED denote

          -Export power LED denote

          • Port VSWR:≤1.8DB
          • I/O impedence: 50Ω/N connector
          • ALC:≥10dB
          • In-Band ripple:≤6dB
          • Noise figure:≤6dB
          • Transmission delay:≤0.5μs
          • Net Weight: 1.37KG

          Power supply: AC/110-220V±10% 4555Hz

          Size: 198mm×148mm×39mm

          Coverage area: 60Sqm

          Accessories

          • Cell Phone Signal Booster
          • Indoor Antenna
          • Outdoor Antenna
          • Power Adapter
          • Coaxial Cable 5M
          • Coaxial Cable 10M
          • Indoor Antenna Accessories and Screws
          • User Manual

          Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=121 Thu, 23 Jul 2015 19:25:14 +0000 338.00 USD 121 2 1000 JM165017 http://www.alljammer.com/Array           High performance RF Digital GSM Cell Phone Signal Amplifier With 3 Indoor Antenna https://www.alljammer.com/index.php?main_page=product_info&products_id=129 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=129 Wholesale High performance RF Digital GSM Cell Phone Signal Amplifier With 3 Indoor Antenna

          Product Description

          Features

          • High-gain linear power amplifier
          • ALC technology
          • Ultra-low noise receive amplifier
          • There is no interference to the base station, after the opening the original system and the base station without the need to adjust parameters
          • Stable and reliable electromagnetic compatibility design
          • The base station does not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications
          • With full-duplex communication mode

          Technical Specifications

          • Working system: GSM
          • Frequency range:
            -uplink: 890-915MHz
            -Downlink: 935~960MHz
          • Output up:
            -Up link:25dBm
            -Downlink: 27dBm
          • Port VSWR:≤1.8DB
          • Noise figure;≤6dB
          • Ambient temperature:-15??~55??
          • Gain:
            -Up link: Gp≥60dB
            -Downlink: Gp≥65dB
          • Function:
            -Power supply LED denote
            -Export power LED denote
          • I/O impedence:50Ω/N connector
          • Transmission delay:≤0.5μs
          • Power supply: AC110-240V
          • Size: 198*148*39mm
          • Coverage area: 300Sqm

          Accessories

          • 1xAC adaptor
          • 3xIndoor Antenna
          • 1xOutdoor Antenna
          • Coaxial cable (30m)

          Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here. http://worldtimezone.net/gsm.html



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=129 Thu, 23 Jul 2015 19:25:14 +0000 289.00 USD 129 1 1000 JM165008 http://www.alljammer.com/images/v/200909/JM166705_1.jpg           ABS-10-1G GSM signal Repeater/Amplifier/Booster https://www.alljammer.com/index.php?main_page=product_info&products_id=309 https://www.alljammer.com/index.php?main_page=product_reviews&products_id=309 Wholesale ABS-10-1G GSM signal Repeater/Amplifier/Booster

          Detailed Product Description

          Features

          l High gain, easy installation and operation.

          l Full-duplex, single-port design, build-in power supply.

          l Use ALC technology, adjust extent automatically

          l LED Light Working & Signal Condition Indicators

          l Big linear power, control intermodulation & saturation stably

          l Dependability stand by GB6993-86 standard

          l Compatibility of electromagnetism according with ETS300 609-4

          l CE and RoHs Approved

          Technique

          Frequency range

          Uplink 890-915MHz
          Downlink 935-960MHz

          Gain ( dB)

          Uplink Gp≥55 Downlink Gp≥60

          Export power (Po)

          ≥10dBm

          Pass band ripple

          ≤5dB

          I/O impedance

          50Ω/N connector

          Noise figure

          ≤6dB

          Transmission Delay

          ≤0.5μs

          Ambient temperature

          -10?/span>?/span>60?/span>

          Power supply

          AC110?/span>240V 45?/span>55Hz

          Size

          145 x 120 x 30 mm

          Reliability

          To the GB6993-86 standard

          Electromagnetic compatibility

          To the ETS300 694-4 standard

          Function

          a) Power supply LED denote
          b) Export power LED denote

          coverage area

          200 m2

          Installation Approaches

          1. Fix up outdoor antenna reception on housetop and point to signal tower.
          2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
          3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
          4. Plug power adaptor into AC power socket and finish installation.

          Technique Supporting

          1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
          2. If cannot call out, please adjust the direction of outdoor antenna.
          3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

          Accessories
          Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

          Packing list
          Main unit 1pc
          Power supply 1pc
          User manual 1pc

          SpecificationsInstallation Sketch Map



          Buy Now ]]>           alljammer@hotmail.com (AllJammer.com) https://www.alljammer.com/index.php?main_page=product_info&products_id=309 Thu, 23 Jul 2015 19:25:14 +0000 50.00 USD 309 3.5 1000 ABS-10-1G http://www.alljammer.com/iiiies/v/200909/JM166705_1.jpg